You don’t need the perfect Tpo Welder, you don’t need the most expensive, you only need the most suitable for your needs!
A smart selection of only the best value for money Tpo Welder
Buying a new Tpo Welder? Make things easier by consulting our list: it’s the top 10 best Tpo Welder out there so you can make no mistakes!
Best Tpo Welder Detailed Features :
110V Hot Air Gun Welding Torch 1600W Heat Gun Plastic Welder Roofing Welder Kits
- [Basic information]: 1.Frequency:50/60HZ Voltage: 110V Power: 1600W2. Adjustable temperature: 20-600 degree continuously adjustable. 3. Air flow: MAX 180L/min Air pressure: 2600Pa. 4. Noise
- [Package include]: 1pc hot air plastic welder gun 110V, 1pc 40mm silicone pressure roller, 1pc 1600w heat element, 1pc 40mm nozzle.
- [Application]: Handy, cost effective,reliable for welding all different types for thermoplastic material, for roofing, flooring, tarps, plastic fabrication, etc. Especially good for long time continuous working site. Welding PVC, PE, PP, PA, EPDM, PS, TPO, EVA materials; drying and activating; shrinking plastic caps; welding Plastic Tanks, Plastic Pipe and Plastic Sheets.
- [Use]: 1. Before using the heater power to the lowest level. 2. Use the knob should be rotated to 1, blowing a few minutes, until the barrel cooled and then shut down. 3. Do not touch the barrel when operating, so as not to burn.
- [Warranty]: One year warranty(not include the heat element) and contact us if you have any problems!
Professional PVC/TPO Single Ply Roofing Welding Tools Heat Gun Kit,120V 1600W Plastic Welder Hot Air Weld Gun with Roofing Seam Rollers/Seam Tester Probe and Weld Nozzle (Plastic Carrying Case)
- 120V 1600W Intelligent automatic cooling system roofing heat gun, save the energy and extend the life of heating elements
- DON'T adjust the temperature knob to "0" after working, directly turn off switch, delay 5 minutes shutdown for cooling down of heating elements
- Comfortable narrow handle with detachable air filter design, high-performance heating power and strong air output
- Professional single ply roofing welding tools includes silicone seam roller, brass detail roller, seam tester, weld nozzles, roofing knife / blades / scissors , wire brush, heating elements and plastic carrying case
- Adjustable hot air from 68°F-1300°F / 20℃ to 700℃, hot air gun with USA plug
1600W Heating Gun Hot Air Gun PVC TPO Plastic welding gun (Type D)
- 1.Max Power: 1600W, Voltage: 120V,50/60Hz, Air message: 3000pa, The flow of air: max 240L/MIN, Insulating intensity: 3750V;
- 2.With electronic heating protection system, temperature adjustable, range: 40-650 degree.
- 3.Low noise and low vibration to ensure comfortable and high quality work.
- 4.Strong power 1600w, suitable for heavy duty and professional work.
- 5.Stainless steel gun barrel reduce the heat lossing and keep working safely.
Hot Air Welding Gun For HDPE Geomembrane Welder For TPO Foof With Flat Weld Nozzle And Rollers For Plastic Welder
1 used from $89.63
- 1. It is handy,cost effective,reliable for weding all different types fo thermaplastic material, for rooifng,flooring ,tarps,plastic fabrication,etc.Especially good for long time continous working site
- 2. Hot air tool for welding PVC, PE, PP, PA, EPDM, PS, TPO, EVA materials
- 3. Hot air tool for drying and activating
- 4. Hot air gun for shrinking plastic caps
- 5. Hot air tool for welding Plastic Tanks, Plastic Pipe and Plastic Sheets
AC220V TPO PVC Roofer Automatic Roofing Hot Air Welder with 40mm Overlap Nozzle
1 used from $3,100.00
- Automatic 4200W power hot air welder,for PVC, TPO, PE, ECB, EPDM roofing material welding
- Promotion: one brass pressure roller, one seam probe tester and one 40mm silica pressure roller with seam probe tester for free ( value $80) from 4th, March to 4th, June, 2019
- Guide bar for handling
- User friendly digital display
- Generally, it will be delivered within 7 working days via DHL.
Automatic Hot Air Welder for Welding Roofing TPO PVC membrane with Free Hot Air Welding Gun (230v roof welder+120v heat gun)
- 【Standard】230V/4200W; with US Twist Lock Plug; for Welding PVC / TPO / CPE
- 【 Display】Microcomputer chip control system show the setting and real-time welding temperature and speed.
- 【Pressure System】Belt and pressure rollers can be transformed that balances the pressure and stable walking, which keeps perfect welding seam
- 【 positioning system】Accurate positioning system ensures walking straightly without deviation by adopting guidance positioning wheels
- 【Delivery】Factory delivery by air express, receive goods in 5-7 days
TryE 1600W Hot Air Heating Welding Gun Plastic TPO PVC Welder Adjustable Temperature with Welding Speed Nozzle Roller Rod Carrying Case
- LOWER VIBRATION: The hot air gun is equipped with a brand new dynamic balance blade, less vibration, working with lower noise, relieving your fatigue better.
- ADJUSTABLE TEMPERATURE: Adjusting the temperature with a wide range from 40°C to 600°C, low temperature resistance, the welding torch could better bond the welded plate and the welding rod together.
- REDUSING HEAT LOSS: Stainless steel gun barrel, compact and low weight design, 1600W strong power, the plastic welding kit has a great effect on reducing the heat loss and keeping working safety.
- SAFE TO USE: Equipped with hot protection tube and electronic heating protection system, more durable and reliable, coming with s green carrying case, portable design, widely used in chemical tanks, plumbing fittings, waterproof membrane and some repair welding in impermeable liner construction site.
- DECENT SERVICE: Your choice of our welder welding kit is pretty appreciated when ordering today. If you have any other concerns about the installation and usage, please feel free to contact us.
Leister Triac ST 141.288 Hand Held Plastic Welder w/ 40mm Nozzle
- SIGNATURE DELIVERY
- MADE IN SWITZERLAND
110V 1600W Professional PVC Roofing Welding Tools Heat Gun Kit Plastic Welder Hot Air Weld Gun with Roofing Seam Rollers Seam Tester Probe Weld Nozzle (Hot gun)
- [Specifications]: Voltage: 120 V; Power: 1600 W; Frequency range: 50Hz - 60Hz; Temperature range: 68°F-1300°F / 20°C- 700°C; Air volume: approx. 250l/min; Static pressure: approx. 3000Pa; Noise emission level: 67dB; Protection class: II (double insulation) ; Size: Ø 90mm x 360mm, handle 55mm; Weight: 1.3 kg with power cord per heat gun;
- [Application]: Repairing tarpaulins and tents Sealing advertising banners; Welding PVC vinyl decking flooring coverings and linoleum; Welding PVC / TPO / EPDM single ply roofing membranes; Welding of technical textiles; Welding pond foil liners; Welding swimming pools.
- [Kit includes]: 1pcs x Hot air welding gun (120V / 1600W) ; 1pcs x Replacement Heating elements with mica tube; 1pcs x 45mm Silicone seam roller; 1pcs x 28mm Silicone seam roller; 1pcs x 6mm Brass penny roller; 1pcs x Seam tester probe, plastic handle; 1pcs x Wire brush, plastic handle; 1pcs x 10" (250mm) Heavy duty roofing scissors; 1pcs x Roofing shark knife; 1pcs x 10pcs Straight blades; 1pcs x 10pcs Hook blades; 1pcs x 40mm Flat weld nozzle;
- 1pcs x 20mm Flat weld nozzle; 1pcs x 20mm 60º Angled nozzle; 1pcs x 20mm 90º Angled nozzle; 1pcs x 5mm Round weld nozzle 1pcs x 5mm Round speed weld nozzle; 1pcs x Plastic carrying case.
- [Warranty]: One year warranty, not include the heat element.
Gekufa Professional Hot Air Plastic Welder 1600w Hot Air Torch Plastic PVC Welding Gun Welder with Speed Nozzle
- Size:The diameter of handle is 5.7cm/2.24". Weight:3.31 lbs (1.5 kg)s.Compact and easy to carry.
- Power: 1600W. Temperature: Up to 700℃/1292℉.With this adjustable temperature range,the welder can meet all your needs for different materials.
- Material:Handle:made of heat-resistant plastic. Nozzles:made from corrosion resistant stainless steel. Heater:made of heat-resistant iolite.Double layer scald-proof tube for safety working.
- Application:Use for welding the plate or pipeline made from PVC/PE/PP/PVDF etc.Repairing plastic items like truck curtains, tarpaulins, water tanks or plastic floor.Welding plastic advertising materials such as PVC flex banner, tarpaulins, TPO materials, etc
- Note:After using,please turn the temperature knob back to 0,keep the fan running and wait for about 5min,make sure the welder has cool down then turn off the power.For any reason you're not completely satisfied, please feel free to contact us for a replacement or full refund.
Are Tpo Welder Worth It?
WG has reviewed more than 10000 Reviews to bring you Tpo Welder. It is absolutely worth buying!
Is Tpo Welder Reliable?
WG based on their analysis has only listed that Tpo Welder that are reliable.
How long does it take to receive Tpo Welder?
Based on the WG Reviews, The Tpo Welder is delivered within 7 days by AMAZON.